Anti-Bribery and Anti Corruption Policy

Introduction

Purpose

Our Code of Conduct states that we do not bribe anyone. This Policy sets forth the respective principles and rules and how they must be implemented.

Scope and Applicability

This Policy applies to all Associates*.

This Policy addresses a variety of contexts in which bribery issues may arise. Other aspects of business ethics and corruption, including conflicts of interest and passive bribery (e.g. receipt of a bribe) as well as insider trading, are regulated separately.

This Policy contains RealTek LLC global standards. In some countries, more stringent applicable laws, regulations or industry codes supersede the principles set out in this Policy.

Divisions and local organizations may also establish more restrictive practices.

This Policy enters into force as of August 27th 2017, and must be implemented by all RealTek LLC affiliates (taking into account local legal considerations).

Principles and Rules

Basic Rules

Principles and Rules

Associates must not bribe and they must not use intermediaries, such as agents, consultants, advisers, distributors or any other business partners to commit acts of bribery.

RealTek LLC does not distinguish between public officials and private persons so far as bribery is concerned: bribery is not tolerated, regardless of the status of the recipient.

Always ask yourself before offering, giving, or promising anything of value to any person if what you are considering could be viewed as having an illegitimate purpose. If the answer is yes, you must not proceed.
If you are in any doubt, consult a legal or compliance representative before proceeding.

Definitions
Bribery means offering, giving or promising (or authorizing someone to offer, give, or promise) an improper benefit, directly or indirectly, with the intention of influencing or rewarding the behavior of someone to obtain or retain a commercial advantage. Bribery can take a variety of forms – offering or giving money or anything else of value. In fact, even common business practices or social activities, such as the provision of gifts and hospitality, can constitute bribes in some circumstances. Situations when Associates receive, agree to receive, request or accept a financial benefit or anything else of value are regulated by the Conflicts of Interest Policy.

References
• RealTek LLC Anti-Bribery Third Party Guideline
• RealTek LLC Conflicts of Interest Policy

Gifts, Hospitality, and Entertainment

Principles and Rules

Gifts, hospitality, and entertainment must be modest, reasonable and infrequent so far as any individual recipient is concerned.

Gifts, hospitality, and entertainment must never be promised, offered, or provided with the intent of causing the recipient to do something favoring RealTek LLC, to reward such behavior, or to refrain from doing something disadvantaging RealTek LLC.

Cash and gifts that are cash equivalent (e.g., shopping coupons) must never be given.

Do not provide entertainment to any participant to RealTek LLC business meetings, congresses or comparable events, unless the entertainment is an appropriate and incidental part of such events. Do not pay for any side or extended trips.

Do not pay for the entertainment, hospitality, or travel costs of anyone who accompanies an invitee to a RealTek LLC business meeting, congress, or comparable event. In situations where an invitee is unable to travel alone (e.g., patients or minors), travel costs for an accompanying person (e.g., caregiver) can be paid for provided that the rationale for this support is legitimate, documented, and considers applicable data privacy requirements.

Before giving a gift or providing hospitality or entertainment to anyone, consider whether the reputation of RealTek LLC, yourself, or the recipient is likely to be damaged if news of the gift, hospitality, or entertainment appeared on the front page of a newspaper. If this would embarrass either RealTek LLC or the recipient, do not proceed.

Definitions
Gifts are benefits of any kind given to someone as a sign of appreciation or friendship without expectation of receiving anything in return. They include ‘courtesy gifts’, which are small gifts given at culturally recognized occasions (e.g., weddings, funerals) or special times of the year (e.g., Christmas, New Year).

Hospitality generally includes refreshments, meals, and accommodation.

Entertainment generally includes attendance at plays, concerts, and sports events.

References
• Principles & practices for professionals or equivalent document of each RealTek LLC Division

Grants, Donations and Sponsoring

Principles and Rules

Grants and donations may only be given if RealTek LLC does not receive (and is not perceived to receive) any tangible consideration in return. At the same time, grants and donations must never reward (or be perceived to reward) any tangible consideration.

Requests for grants or donations must be handled with special caution, in particular those from requesters who are able to affect the sales of RealTek LLC or may benefit personally if the request is granted. For instance, grants or donations must not be given to obtain a marketing authorization or any other approval, or to directly increase the sales of a product in return.

Sponsoring must not be used (or perceived to be used) to receive an improper commercial advantage in return. At the same time, sponsoring must never reward (or be perceived to reward) an improper commercial advantage.

Grants, donations, and sponsoring may not be provided to individuals.

Definitions
Grants and donations are benefits given by RealTek LLC in the form of money and/or in-kind contributions (e.g., the supply of a RealTek LLC product for free or at a reduced price).

RealTek LLC provides grants and makes donations for a variety of legitimate purposes, including funding research or measures to improve health care systems and supporting charitable projects.

The main difference between grants and donations is that grants are given for a specific purpose (e.g., research or education) while donations address humanitarian needs, including emergency and natural disaster situations (e.g., earthquake).

Sponsoring is an agreement with a reputable non-healthcare institution or company under which the institution or company will, for payment, take measures to enhance the general image or reputation of RealTek LLC.

References
• Principles & practices for professionals or equivalent documentation
• Sponsoring and Donations Review and Approval Procedure

Rules Relating to Public Officials

Principles and Rules
RealTek LLC does not distinguish between public officials and employees of private sector organizations so far as bribery is concerned; however, it is important to recognize that public officials are often subject to rules and restrictions that do not apply to persons who operate in the private sector.

Any relationship with public officials must be in strict compliance with the rules and regulations to which they are subject (i.e., any applicable rules or regulations in the particular country relating to public officials or that have been imposed by their employer) and any benefit conveyed to a public official must be fully transparent, properly documented, and accounted for.

Definitions
The term ‘public official’ has been extensively interpreted by regulators and includes
• Any elected or appointed officer or employee of a government or government department,government agency, or of a company owned or partially owned by a government
• Any elected or appointed officers or employees of public international organizations, such as the United Nations
• Any person acting in an official capacity for or on behalf of a government or a government department, government agency, or of a public international organization
• Politicians and candidates for a political office
• Any other person who is considered to be a public official according to applicable laws, regulations and industry codes

Medical and scientific personnel qualify as public officials when they work at a hospital, clinic, university or other similar facility owned or partially owned by a government.

In some countries, doctors, pharmacists, clinical trials investigators, and nurses are public officials irrespective of whether they are working at a government institution.

Political contributions

Principles and Rules
Generally, RealTek LLC does not make political contributions. However, since public policy issues impact RealTek LLC business, its employees, and the communities in which RealTek LLC operates, in certain cases it may be appropriate to use its resources to make political contributions.

Political contributions must never be made with the expectation of a direct or immediate return for RealTek LLC.

RealTek LLC may make political contributions only where these are part of the political culture in a country and are seen as part of the corporate social responsibility of corporations.

Political contributions must meet all of the following requirements:
• Compliant with applicable laws, regulations, and industry codes
• Covered by a separate budget position, approved in the ordinary budget process
• Approved in advance by the Company President

Definitions
Political contributions are monetary or non-monetary (e.g., resources, facilities) contributions to support political parties, politicians or political initiatives.

Lobbying

Principles and Rules
RealTek LLC may engage in lobbying activities to provide policy makers with data and insights to enable widely informed decision-making conducive to improving patient outcomes and sustainable business.

Lobbying should not be misused for any corrupt or illegal purposes, or to improperly influence any decision. Relevant functions (e.g., Public & Government Affairs) provide guidance on how lobbying should be conducted based on the values of transparency, honesty and integrity.

Definitions
‘Lobbying’ describes interactions with policy makers and other external stakeholders with the intent to represent RealTek LLC perspective in the policy making process. Active contribution to policy making is an integral part of the democratic process and a legitimate activity as it enables the representation of different societal interests.

References
• Code of Conduct
• Internal Guidance on Lobbying
• RealTek LLC Anti-Bribery Third Party Guideline

Facilitation Payments

Principles and Rules
RealTek LLC prohibits facilitation payments, irrespective of whether local law permits facilitation payments.

Definitions
Facilitation payments are payments to public officials to expedite the performance of duties of a non-discretionary nature. These payments are intended to influence only the timing of the public officials’ actions (e.g., payments to expedite the issuance of a visa or clearing goods through customs), but not their outcome.

Third Parties

Principles and Rules

RealTek LLC must only engage Third Parties if all of the following requirements are met:
• There is a legitimate need for the services or the goods that they provide
• The services and goods are priced at no more than market value
• The Third Party is suitable from an anti-bribery perspective after assessment in a robust Due Diligence process
• There is a written contract or other written document with a similar legal effect (e.g., Purchase Order)

The receipt of services or goods must be documented and in line with the requirements stipulated in Section 2.10 of this Policy.
Engagement of Third Parties – including healthcare professionals – must never be used to create an incentive, or to reward or to secure any improper business advantage for RealTek LLC.

Definitions
A Third Party is any natural person or legal entity with whom RealTek LLC interacts and who poses, due to the nature of their business, a particular level of bribery risk. RealTek LLC affiliates and Associates are not considered Third Parties in this Policy.

References
• RealTek LLC Anti-Bribery Third Party Guideline
• Anti-Bribery Guideline for New Businesses and Joint Ventures

New Business and Joint Ventures

Principles and Rules

Before entering into an agreement for new business or entering into a joint venture, adequate anti-bribery due diligence must be completed. In addition, a remediation plan should be developed and implemented to address identified issues.

Definitions
New business means any transaction involving the takeover or acquisition of all or any part of a third party or business, or the merger of a RealTek LLC business with another company or business.

Joint venture means any type of joint agreement or arrangement between RealTek LLC and one or more third parties to own and operate an enterprise as a separate business for the mutual benefit of RealTek LLC and the third party or parties.

References
• Anti-Bribery Guideline for New Business and Joint Ventures

Books and Records/Internal Controls

Principles and Rules

RealTek LLC must prepare and maintain books and records that accurately and in reasonable detail document the source and use of Company revenues and assets.

‘Off-the-books’ accounts and false or deceptive entries in RealTek LLC books and records are strictly prohibited. All financial transactions must be documented, regularly reviewed and properly accounted for in the books and records.

All relevant financial controls and approval procedures must be followed.

The retention and archive of records must be consistent with common standards and tax and other applicable laws and regulations.

Definitions
Books and records include accounts, invoices, correspondence, papers, CDs, tapes, memoranda and any other document or transcribed information of any type.

References
• Management Authorization Levels
• Financial Controls Manual
• Accounting Manual

Implementation

Training

Associates must familiarize themselves with this Policy. Associates must be trained per the compliance training curriculum.

Training requirements for Third Parties are defined by the RealTek LLC Anti-Bribery Third Party Guideline.

External contractors and external service providers other than Third Parties shall be trained in accordance with regular associates.

Reporting Potential Misconduct/Non-Retaliation
Any Associate who learns of a potential violation of applicable laws or this Policy is required to report his or her suspicion promptly in accordance with the section of the RealTek LLC Code of Conduct.

Associates who, based on good faith, report potential misconduct or who provide information or otherwise assist in any inquiry or investigation of potential misconduct will be protected against retaliation.

Breach of this Policy
Breaches of this Policy will not be tolerated and can lead to disciplinary and other actions up to and including termination of employment.

Exceptions
No exceptions can be granted from compliance with applicable laws, regulations and industry codes.

Responsibilities and Implementation

It is the responsibility of every manager to implement this Policy within his or her area of functional responsibility, lead by example, and provide guidance to the Associates reporting to him or her. Managers must also seek to structure incentives and conduct performance assessments accordingly.

All Associates are responsible for adhering to the principles and rules set out in this Policy.

The owner of this Anti-Bribery Policy is Group Integrity & Compliance.

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.